The cleaning methods for a glass marbles machine mainly include the following steps:
1. Power Off: Before performing any cleaning work, first ensure that the machine is completely powered off to avoid the risk of electric shock.
2. Surface Cleaning: Use a soft cloth or sponge with a mild detergent to gently wipe the external surface of the machine to remove dust and stains. For stubborn stains, use a soft-bristled brush to gently scrub.
3. Internal Cleaning: Open the machine's casing and check for dust or dirt buildup inside. Use compressed air to blow away dust, or gently wipe with a soft cloth. For stubborn stains, use a cotton swab dipped in a small amount of alcohol to gently wipe them.
4. Marble Cleaning: Remove the marbles and wash them with warm water and a neutral detergent, then rinse thoroughly with clean water. Finally, air dry or wipe dry with a clean cloth.
5. Disinfection: To ensure hygiene, you can disinfect the inside of the machine and the marbles with 75% alcohol.
6. Inspection and Maintenance: After cleaning, inspect all machine parts for damage or wear. If any problems are found, repair or replace them promptly.
7. Reassembly: Reassemble the cleaned and disinfected parts back into the machine, ensuring all parts are properly installed.
8. Testing: Before reconnecting power, conduct a thorough test to ensure the machine operates normally without any abnormal noises or malfunctions.
